t100 — Sleep-Wake Sel

Drive “sleeps” if the appropriate analog input drops below the set t101 [Sleep Level] for the time set in t102 [Sleep Time] and the drive is running. When entering sleep mode the drive ramps to zero and the run indicator on the keypad display flashes to indicate that the drive is in “sleep” mode. When the appropriate analog input rises above the set [Wake Level], the drive “wakes” and ramps to the commanded frequency. Inversion can be accomplished by setting [Sleep Level] to a higher setting than t103 [Wake Level]. ATTENTION: Enabling the Sleep-Wake function can cause unexpected machine operation during the Wake mode. Equipment damage and/or personal injury can result if this parameter is used in an inappropriate application. In addition, all applicable local, national, and international codes, standards, regulations or industry guidelines must be considered.