Rockwell Automation PowerFlex 525 · Parameter t094
t094 — Anlg In V Loss
Sets the response to a loss of input. When the 0…10V input (or –10…+10V) is used for any reference, any input less than 1V is reported as a signal loss. Input must exceed 1.5V for the signal loss condition to end. If enabled, this function affects any input that is being used as a speed reference, PID reference or PID setpoint in the drive. Options 4 “Min Freq Ref”
Grounded · PowerFlex 525 Adjustable Frequency AC Drive User Manual (520-UM001O-EN-E) · manual-cited
Cited reference
t094
Anlg In V Loss
Sets the response to a loss of input. When the 0…10V input (or –10…+10V) is used for any reference, any input less than 1V is reported as a signal loss. Input must exceed 1.5V for the signal loss condition to end. If enabled, this function affects any input that is being used as a speed reference, PID reference or PID setpoint in the drive. Options 4 “Min Freq Ref”
PowerFlex 525 Adjustable Frequency AC Drive User Manual (520-UM001O-EN-E), p.99
“t094 [Anlg In V Loss] Related Parameters: P043, P044, A426, A427”
Full settings & value table
Drive Commander Pro
The full cited pack
- Every parameter reference with value/setting tables
- Wiring, terminal, and I/O checks
- Control-source setup & reset / recovery workflow
- Ask-MIRA follow-up questions on this exact drive
- Saved troubleshooting history & pack updates
Cancel anytime · 30-day money-back guarantee